Description

The FasTie Centre Air Adaptor may be permanently mounted to the ejector piston. 

It is used to connect to the back of the Fastie quick release coupling and then the assembly is connected to your ejector, this allowing side entry of pneumatic air to open the coupler to release from the mould tool stud.

4 sizes are available: To fit 1″, 1-3/8″, 2″ and 3″ Fastie couplers.

Choice of threads: Contact us if yours is not listed.

Download: The Smartflow Fastie Brochure

What is the Fastie System?

1. You will require a Fastie coupler.
2. A centre air adaptor for single ejection systems from this page.
3. A Fastie tool stud for location on your mould tool.

Smartflow-Product-Summary-In-English.pdf
Smartflow Product Summary En français
Smartflow Product Summary Auf Deutsch
Smartflow Product Summary En Español
Smartflow Product Summary Po Polsku

For ejector plate systems you will require 2 or 4 coupler and 1 or 4 tool studs, a centre air adaptor is not required as the air supply can be connected directly to the back of the Fastie coupler through the back of the ejector plate.

Why Buy?

• FasTie installs easily with central ejector systems (with centre air adaptor) and into existing tapped holes, no additional machining is required.
• FasTie reduces mould setting time by quickly uncoupling without loose parts to stow.
• FasTie remains coupled during mould cycling for increased “tie-in” reliability and reduced wear.
• SpeedBar® adjustable knockout bar changes length quickly without tools [±1/2″(12.7mm) from nominal in .006″(.15mm) increments].(1″ Models Only)
• SpeedBar saves moulders time and cost of machining individual knockout bars to fit different moulds.